Pi1541-II Case

This is a Pi1541-II Case for the Backoffice Show PCB for the Pi1541 software created by Stephen White.

This design is still a work in progress and various tweaks may still be required

Screws are required, self tappers 3mm

__v1.1__
Update to the bottom sections of the case, they needed to be taller and a pillar was slightly in the wrong place for the HDMI port to be accessed.

* case-bottom.stl
* case-middle.stl
* full-case-bottom.stl
* full-case-bottom-with-oled-screw.stl


__v1.2__
Update to full case top sections, i could not quite fit my OLED screen and board.

* full-case-top-face-large-oled.stl
* full-case-top-face-small-oled.stl


__v1.3__
Adjustment for tolerances for OLED screens.

* full-case-top-face-large-oled.stl
* full-case-top-face-small-oled.stl
* case-face-large-oled.stl
* case-face-small-oled.stl

__v1.4__

Removed the separate parts as it is easier to print just the top with front already attached.
Moved front posts further back to