Thingiverse
Pibow Coupé Case Bracket For Lulzbot Mini
par bmemike
4
Téléchargements
0
Likes
0
Makes
**20160609:** I updated the STL file so that the mounting bracket can accommodate the brackets for the popular plexiglass enclosure you can find on eBay and Amazon for the Mini. If you're not using it, then it doesn't affect you. But that's what the "random slot" is for. The pics of the green bracket is from version 1. They're still useful as the mounting process remains the same. The yellow bracket is the updated version 2 which lets the enclosure bracket fit. They're functionally identical beyond the notch and some minor structural and tolerance improvements.
This is a small bracket that allows you to attach a Raspberry Pi in a [Pibow 3 Coupé case](https://shop.pimoroni.com/products/pibow-coupe-for-raspberry-pi-3) to the side of a Lulzbot Mini. The benefit here is that you can run OctoPrint on the Pi that's tucked out of the way on the side of the Mini.
The bracket-to-Pi side uses 2.5mm nylon bolts. The bracket-to-Mini side uses 3mm nylon bolts. You should avoid anything metal
This is a small bracket that allows you to attach a Raspberry Pi in a [Pibow 3 Coupé case](https://shop.pimoroni.com/products/pibow-coupe-for-raspberry-pi-3) to the side of a Lulzbot Mini. The benefit here is that you can run OctoPrint on the Pi that's tucked out of the way on the side of the Mini.
The bracket-to-Pi side uses 2.5mm nylon bolts. The bracket-to-Mini side uses 3mm nylon bolts. You should avoid anything metal
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
