picatchu

Project: pcatchu.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 137.14x240mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 3.28mm and the Actual Thickness is 2.88mmFilaments Used: #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #00aaff PLA Generic bleu clair Transmission Distance: 4 #40e0d0 PLA Bambulab Basic Turquoise Transmission Distance: 5 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 8 unique filamentsSwap Instructions: Start with Jade White At layer #8 (0.72mm) swap to Gray At layer #10 (0.88mm) swap to Black At layer #11 (0.96mm) swap to Blue Gray At layer #15 (1.28mm) swap to Red At layer #20 (1.68