Thingiverse
Picatinny Riser 25mm
por haphazardlynamed
43
Descargas
43
Likes
1
Makes
25mm Picatinny Riser
hardware needed:
5mm x 30mm bolt, with a head no larger than 9mm
nut with 8mm wrench flats
Slots are sharkfinned to simplify perimeter topology for fewer retractions and improved print quality.
Should still be compatible with most accessories that clamp with a 5mm bolt.
May not be compatible with accessories that snap-on.
Prints in orientation as provided with no Supports.
Bolt hole is filled in by a thin wall to improve print quality, drill out postprocess.
hardware needed:
5mm x 30mm bolt, with a head no larger than 9mm
nut with 8mm wrench flats
Slots are sharkfinned to simplify perimeter topology for fewer retractions and improved print quality.
Should still be compatible with most accessories that clamp with a 5mm bolt.
May not be compatible with accessories that snap-on.
Prints in orientation as provided with no Supports.
Bolt hole is filled in by a thin wall to improve print quality, drill out postprocess.
haphazardlynamed también publica en
115 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
