Piccolo Hueforge

Creado con hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x112.08mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 1.4mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Smart Recycled Green Transmission Distance: 6.5 PLA Smart Recycled Coral White Transmission Distance: 6.4This print uses 4 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Green At layer #13 (1.12mm) swap to Coral White for the rest.