pichu pikachu hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.67x200mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 Start with Black At layer #7 (0.64mm) swap to Gray At layer #16 (1.36mm) swap to Yellow At layer #23 (1.92mm) swap to Jade White for the rest. Commencer par le noir à la couche #7 (0.64mm) changer pour le gris à la couche #16 (1.36mm) changer pour le jaune à la couche #23 (1.92mm) changer pour le blanc pour le reste