PICO-56 Case

This is a basic enclosure for a Pico-56 computer based on Raspberry Pi Pico.
I used 2.0 mm x 12 mm bolts from the bottom

3/3/2024 - I fixed the Cover to add cutouts for the NES ports.

everything should print ok flat face down - for the bottom add supports for the windows then cut out with snips after printing.

I used a skirt - but probably only the buttons need the extra adhesion..

The Troy Schrapel - creator of Pico-56 posted an alternative Case : https://github.com/visrealm/pico-56/tree/main/case