Thingiverse
PiCopter
par PiCopter
108
Téléchargements
66
Likes
0
Makes
Please go to [Picopter.org](http://www.picopter.org/picopter) for full printing and building instructions.
Raspberry Pi based drone, with full gimbal, remote controller and VR-glasses!
Otherwise, it's quite a simple but looong print.
Arms with or without support, print flat. Min 5% infill
Legs upside down, without support. Min 1% infill
Hull rightsize up, with support. Min 1% infill
Chassis upside down, with support. Min 10% infill
Gimbal 1, 2 & 3, however your printer prefers, with support. Min infill 15%
Raspberry Pi based drone, with full gimbal, remote controller and VR-glasses!
Otherwise, it's quite a simple but looong print.
Arms with or without support, print flat. Min 5% infill
Legs upside down, without support. Min 1% infill
Hull rightsize up, with support. Min 1% infill
Chassis upside down, with support. Min 10% infill
Gimbal 1, 2 & 3, however your printer prefers, with support. Min infill 15%
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !