Picture frame

This is a bike themed picture frame! For my own picture frame I added bikes to the frame (files can be found here), and I added a date at the bottom. The picture frame is thick enough to stand on its own, and as such has no stand. You can also put it on an angle against a surface. If you want a version with stand, feel free to let me know in the comments :) Important info Glass pane:For this picture frame you need a glass pane around 15 x 10 cm big. The model assumes a pane thickness of ~1.7 mm. If your pane is thicker or smaller, adjust by scaling (or cutting) the difference for the “Picture frame - back” part. Example: Your pane is 2.0 mm thick. Adjust the back piece to be (1.7 - 2.0 = -0.3) 0.3 mm thinner than normal.Your pane is 1.2 mm thick. Adjust the back piece to be (1.7 - 1.2 = 0.5) 0.5 mm thicker than normal. What to print:1x frame1x back2x notch2x pin How to print:For all parts, simply lay the part on the largest flat surface. For the frame this means the notch cutouts face