Picture Frame

Simple magnetic picture frame tuned for a 4x6 print.

Easily modified if you know openscad but the provide stl files will work as-is

Holes are for insertion of standard magnets you can find on ebay

Instructions:
Print in two pieces (frontFrame and backFrame)
Print frontFrame with bevel side down on printer plate.
Print backFrame with hole side up.

Insert Magnets and glue top frame onto bottom frame.

Notes before glueing!: The frontFrame backside has an inset to allow the photo to slide into the frame from the top. Make sure you orient the frontFrame so the slot is at the top of the backFrame. The magnet holes of the backFrame should be at the bottom.

You can get the magnets on ebay. Search for "Super Strong N35 Round Disc Neodymium Mini Fridge Magnets". The holes will accept 4x2mm magnets. I put a magnet in every hole but I think you could put one in every other hole and it would hold very well. Test before glueing together. The magnets should be on the inside