Pikachu as Raiden Hueforge

Pikachu as Raiden Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.7mm and the Actual Depth is 3.7mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.1 PLA BambuLab Basic Brown Transmission Distance: 1.4 PLA BambuLab Basic Blue Gray Transmission Distance: 2.5 PLA PolyTerra Pastel Ice Transmission Distance: 1.8 PLA BambuLab Basic Yellow Transmission Distance: 5.2 PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 6 unique filaments ***attached .3mf file prints the first 7 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #17 (1.44mm) swap to Brown At layer #19 (1.6mm) swap to Black At layer #20 (1.68mm) swap to Blue Gray At layer #24 (2mm) swap to Pastel Ice At