Pikachu decor - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:    PLA BambuLab Basic Black Transmission Distance: 0.6    PLA BambuLab Basic Red Transmission Distance: 4    PLA BambuLab Basic Yellow Transmission Distance: 6    PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions:    Start with Black    At layer #8 (0.72mm) swap to Red    At layer #14 (1.2mm) swap to Yellow    At layer #23 (1.92mm) swap to Jade White for the rest.