Pikachu hueforge

Pikachu hueforge-Pokemon 5 colorsPrinting InstructionsPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 112.65x200mm in sizeFilaments UsedPLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Hot Pink Transmission Distance: 3.9PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 Swap Instructions Start with Black At layer #11 (1mm) swap to Red At layer #13 (1.16mm) swap to Hot Pink At layer #16 (1.4mm) swap to Sunflower Yellow At layer #21 (1.80mm) add pause to swap color to white At layer #23 (1.96mm) swap to Jade White for the rest Heads up Bambu Studio might show a gray layer at the pause point, but it doesn’t affect the print. It’s just a slicer preview AMS or AMS lite will still use the correct filament For people with 1 AMS or AMS liteLoad your first four colors (Black, Red, Hot Pink, Sunflower Yellow) in the AMS Lite or AMSWhen slicing, assign the final color White t