pikachu hueforge

this is pikachu hueforge color match from hueforge enjoy it! Boost Meboost me if you like it!! it supports my workPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Pure Yellow Transmission Distance: 5 PLA+ Sunlu Light Gold Transmission Distance: 3 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA+ Esun Brown Transmission Distance: 1.5 PLA Sunlu Meta Black Transmission Distance: 1This print uses 6 unique filamentsSwap Instructions: Start with White At layer #7 (0.64mm) swap to Pure Yellow At layer #11 (0.96mm) swap to Light Gold At layer #13 (1.12mm) swap to White At layer #16 (1.36mm) swap to Scarlet Red At layer #19 (1.6mm) swap to Brown At layer #22 (1.84mm) swap to Black for the rest.