pikachu steampunk

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x361.58mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA default black Transmission Distance: 6 PLA Default White Transmission Distance: 5 PLA Default yellow Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with black At layer #3 (0.96mm) swap to White At layer #5 (1.12mm)