Pikascrew

I needed an M8 wingscrew for a project for my kiddo, but wingscrews are boring. Obviously, the only solution was to overcomplicate it in a way that I could use a pun. This is printed as objects to: Minimise support Make prettier surfaces Improve strength Reduce waste if printing in multiple colours I have included plates so you can print 1, 2, or 4 pikascrews at a time. If you want to print without AMS: print one object, change filament, print the next object, and so on. This file uses the same filament for the screwcaps and the threaded part - but in the picture I've used silver ABS for the threaded part. Suggersed Assembly: Put the red insert into the black outline - have it sitting level with the top edge. Push the black outline onto the screwcap - starting on the side with the lower section (the red insert must line up with the lower section) This bit is pretty tricky because it's a tight fit - this was on purpose to avoid the need for glue while fiddling things into place. Push th