Thingiverse
Pill Box Labels
por falconman
2
Descargas
2
Likes
0
Makes
The printed labels on my weekly pill organizer wore off, so I created a set of labels that would physically attach.
Print the design out. I used .2 layer height and 10% infill. Drill a 3mm hole in each compartment and press the peg on the back of the labels into the hole. Then use a soldering iron or other heat source to melt the peg like a rivet to fasten the lablel in place.
To get two color, I added a pause (M600) by manually editing the gcode file and placing the command just before the "LAYER:4" label.
Print the design out. I used .2 layer height and 10% infill. Drill a 3mm hole in each compartment and press the peg on the back of the labels into the hole. Then use a soldering iron or other heat source to melt the peg like a rivet to fasten the lablel in place.
To get two color, I added a pause (M600) by manually editing the gcode file and placing the command just before the "LAYER:4" label.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!