pill box with weekly task organization

DIMENSIONS 207 x 45 x 20 mm (L x W x H) YOU NEED28 round magnets (5x2 mm) (check pictures for correct orientation)super glue or something similar to fixate the magnets in place metal rod ⌀ 1,3 - 1,5 mm, with a length of 19,5 cm or morePLA (I do not recommend using PLA with infill (such as Glow in the dark / wood filled PLA) when printing the lids) YOU MAY ALSO NEEDsmooth plate / Cool Plate Supertack or similiar plates (for a nice matte finish)pliers (to cut metal rod to approximately 19,5 cm)3D pen to close the holes for the metal rod (only if you use a rod with ⌀ 1,3 mm or smaller, otherwise you probably don&#39;t need one. Alternatively, you can close the holes by extruding some filament from your nozzle directly into the hole) thick paper / thin cardboard and scissors to write your tasks, orthin permanent marker (if you want to use 3d printed writing surfaces)and a glue roller to insert your notes, for example <a target="_blank" rel="noopener noreferrer ugc" href="https://www.amazon