Thingiverse
Pilot's SkyEcho2 Protective Case
von PropClear
2
Downloads
1
Likes
0
Makes
Protective case for the SkyEcho2 | ADS-B | Flarm collision warning system
Print with support, slide in the optional mounting plate and fix it with a screw if desired so that the device does not slip out of the case.
Can be attached direct to the aircraft or pilot's bag with a cable tie, clip or through the small hole above the clip.
The suction cup attachment to the aircraft window can thus be dispensed with and the device is optimally protected.
If my designs help and you like them, feel free to throw a tip in the PayPal pot.
Share the link to my designs with your friends if my parts may help them too ;-)!
Always happy landings!
Print with support, slide in the optional mounting plate and fix it with a screw if desired so that the device does not slip out of the case.
Can be attached direct to the aircraft or pilot's bag with a cable tie, clip or through the small hole above the clip.
The suction cup attachment to the aircraft window can thus be dispensed with and the device is optimally protected.
If my designs help and you like them, feel free to throw a tip in the PayPal pot.
Share the link to my designs with your friends if my parts may help them too ;-)!
Always happy landings!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
