Pin-Up

Project: Pin Up.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.8mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled White Transmission Distance: 5.7 PLA Smart Recycled Red Transmission Distance: 4.4This print uses 3 unique filaments Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Black At layer #10 (0.88mm) swap to White At layer #22 (1.84mm) swap to Red At layer #31 (2.56mm) swap to White for the rest.