Pinball Playfield Level Tool

This is another type of pinball level where you use with a small digital level from Amazon or similar. The bracket in yellow is 3d printed and is dual sided:one side is for checking and setting the games - side to side levelthe other side is for checking and setting the games - front to back levelChecking and setting the games - side to side levelPhoto 1 - The bracket is engraved with LEFT and RIGHT - align the LEFT to the LEFT side of your playfield and RIGHT to RIGHT side of your playfield near the flippers and then up higher in the game.Photo 2 - shows a better view.Photo 3 - on the right side will show a 6.5 Deg engrave, set the bracket like this as in placing the bracket on your playfield the bottom has a 6.5 Deg cut away so the level itself sits level on top of the bracket. Some levels can not handle leaning forward as will error out if greater than 5 degrees - so this will flatten out your level.Then set your games side to side levels - Photo 1 shows a lean to the side of 0.28 D