"Pinch Hazard" - Mini Bot

After making This Side Up, which while fun to drive, is nearly impossible to steer effectively. I decided to make Pinch Hazard as a more conventionally steering based bot. I wanted to use the cyberbrick kit, but the other models looked so big for it, so I kept it as small as I could. Assembly Outline:If you don't already have one, print off and assemble the cyberbrick remotePrint off all the componentsAssemble the GearboxesAdd heat set inserts into the main body (8 around the edge, 2 for the receiver, and 1 in the back for the power switch)Add the extension wire onto the switch, and mount the switch to the rear mounting post.Plug the battery into the switch and lay into the bottom of the frameAdd tires to all the wheelsAssemble the front wheelSlot the wheel with the hole going all the way through into the forksInsert the shaft through the wheel and the forks, it should snap into placeSlot the forks into the front lid, and snap the larger of the two steering gears onMount the servo