Thingiverse
PINE A64-LTS case
di mkusr1
8
Download
5
Likes
0
Makes
This is a case for the A64-LTS board. It was slightly modified from the [PINE A64 / A64+ computer case](https://www.thingiverse.com/thing:1287387). I have tested this with v1.2 of the board.
The A64-LTS board is slightly different than that A64 in that it has the microSD card slot on the bottom (top has the eMMC slot), the microUSB power has been replaced w/ a small barrel jack, and there are a couple switches and LEDs.
I added a small window to allow a console cable to be plugged into the EXP header. I removed the pine logo from the bottom as the -LTS does not have any components on the bottom, and I didn't want that much exposure on the case. I also expanded the holes to 4mm diameter, which makes M3 bolts go through easily w/o having to drill them out.
It is likely that you can use a stand from the original, but I have not tried it.
The A64-LTS board is slightly different than that A64 in that it has the microSD card slot on the bottom (top has the eMMC slot), the microUSB power has been replaced w/ a small barrel jack, and there are a couple switches and LEDs.
I added a small window to allow a console cable to be plugged into the EXP header. I removed the pine logo from the bottom as the -LTS does not have any components on the bottom, and I didn't want that much exposure on the case. I also expanded the holes to 4mm diameter, which makes M3 bolts go through easily w/o having to drill them out.
It is likely that you can use a stand from the original, but I have not tried it.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!