Pinhead Connector

Pinhead connector is designed to offer a basic connector for electronics that can be printed on demand using a standard single row 2.54mm male header pins as shown in one of the images attached. Each file available covers pin numbers of 1 to 5, There are 2 files to every connector, PinHhead_Connector_x5 & PinHhead_Connector_x5mirror are a pair, the file ending in mirror is an exact mirrored duplicate of the first file, this is required to bring both sides of the connector together.

All files are printed with a standard 0.4 nozzle with a very standard 0.2 layer hieght.
Most importantly as designed for maximum strength, it needs to be printed entirely with "Walls",
No infills, No top or bottom layers, No supports.
The orientation of the print is as shown in the STL files.
A 3 pin connector takes roughly 8 minutes to print.

When printed, the long 6mm side of the pinheader is pushed into the channels of the print as far as it can go, you will need to with a bit of force towards the end,