Pink Floyd- The Wall

Pink Floyd Sign Recreated and pushed through HueForge, Color setting should be set b profile, Instructions for ayers are as follows: Project: TheWall.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 1.8mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Red At layer #15 (1.28mm) swap to Gray At layer #17 (1.44mm) swap to Jade White for the rest.