Pinky Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Pink Transmission Distance: 12 PLA BambuLab Basic Ice Blue Transmission Distance: 3.5This print uses 6 unique filamentsSwap Instructions: Start with Brown At layer #8 (0.72mm) swap to White At layer #14 (1.2mm) swap to Red At layer #17 (1.44mm) swap to Black At layer #19 (1.6mm) swap to Pink At layer #23 (1.92mm) swap to Ice Blue for the rest.