Thingiverse
PiPod enclosure
por BramRausch
71
Descargas
46
Likes
0
Makes
This is the enclosure for my PiPod project. The PiPod is a portable music player made with a Raspberry Pi Zero.
In the bottom part of the enclosure there is room to mount the Raspberry Pi Zero, a Powerboost 500C, a slide switch, 3.5mm Audio jack and a 1200mAh battery. The display and the buttons could be attached to the top part. The top part hinges in and is secured to the bottom part using three 2mm screws.
update #3 24-bit DAC
* changed audio output to a DAC
* added screw hole for a better assembly(Front will be updated soon)
* moved power switch
* added pockets for wires and battery
update #2 almost final version
* Bigger tabs on the middle button so it moves less
* More space for the powerboost because it didn't quite fit
* Added some space to route wires to power from the USB input
Update #1
* The screw holes are now countersunk
* There are little lids so the middle button won't completely rotate
* The SD card hole is a little bigger
* The clip for the audi
In the bottom part of the enclosure there is room to mount the Raspberry Pi Zero, a Powerboost 500C, a slide switch, 3.5mm Audio jack and a 1200mAh battery. The display and the buttons could be attached to the top part. The top part hinges in and is secured to the bottom part using three 2mm screws.
update #3 24-bit DAC
* changed audio output to a DAC
* added screw hole for a better assembly(Front will be updated soon)
* moved power switch
* added pockets for wires and battery
update #2 almost final version
* Bigger tabs on the middle button so it moves less
* More space for the powerboost because it didn't quite fit
* Added some space to route wires to power from the USB input
Update #1
* The screw holes are now countersunk
* There are little lids so the middle button won't completely rotate
* The SD card hole is a little bigger
* The clip for the audi
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
