Thingiverse
PiPod enclosure V2
por BramRausch
40
Descargas
28
Likes
0
Makes
This is the enclosure for my PiPod project. The PiPod is a portable music player made with a Raspberry Pi Zero.
[If you want the buy the PiPod board you can visit my Tindie store](https://www.tindie.com/products/Bram/pipod-raspberry-pi-zero-portable-music-player/).
For more information about the build visit [Hackaday.io](https://hackaday.io/project/26157-pipod)
# Board thickness
The new PiPod boards will have a thickness of 1.6mm for this version you have to download the 1.6mm version of the top and bottom STL.
#PiPod features
##Display
The display on this board has a resolution of 320 by 240 pixels with a screen diagonal of 2.2”. It is connected to the Raspberry Pi using the SPI bus.
##I2S Audio output
This board includes the PCM5102A a 24-bit I2S DAC with a 3.5mm jack. This IC is used to generate high-quality audio without a hum like you would get if you're using the onboard PWM as the audio source.
##User controls
On the board are controls for navigation, volume
[If you want the buy the PiPod board you can visit my Tindie store](https://www.tindie.com/products/Bram/pipod-raspberry-pi-zero-portable-music-player/).
For more information about the build visit [Hackaday.io](https://hackaday.io/project/26157-pipod)
# Board thickness
The new PiPod boards will have a thickness of 1.6mm for this version you have to download the 1.6mm version of the top and bottom STL.
#PiPod features
##Display
The display on this board has a resolution of 320 by 240 pixels with a screen diagonal of 2.2”. It is connected to the Raspberry Pi using the SPI bus.
##I2S Audio output
This board includes the PCM5102A a 24-bit I2S DAC with a 3.5mm jack. This IC is used to generate high-quality audio without a hum like you would get if you're using the onboard PWM as the audio source.
##User controls
On the board are controls for navigation, volume
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!