PIRATE 7

REGLAGES :Project: pirate7.3.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 124.71x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.5mm and the Actual Depth is 1.5mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Brown Transmission Distance: 2 PLA Bambulab Basic Bronze Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #8 (0.72mm) swap to Brown At layer #10 (0.88mm) swap to Black At layer #11 (0.96mm) swap to Bronze At layer #14 (1.2mm) swap to Orange At layer #15 (1.28mm) swap to Jade White for the rest.