Pirate Gril HueForge

Picture source/author: SandySarten @sandysartenThen used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size model/profile, the first is 200x200 and the second for A1Mini 180x180. The color change settings are identical. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 2.3mm and the Actual Depth is 2.4mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used:PLA Elegoo+ Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Orange Transmission Distance: 4.8PLA Elegoo + Gray Transmission Distance: 3PLA Elegoo+ White Transmission Distance: 8.9This print uses 5 unique filaments