Pirate naval battle

Pirate naval battle Sink your opponent's ship! The cannon can shoot hard! Watch out for the eyes! Use them at your own risk You can play in and out of the pool. The bottom of the boat is flat I have not yet tested the boats in a swimming pool. If the waves sink the boats please let me know and I will make them bigger. It takes some practice to shoot with the cannon Print instructions: I have printed the barrel using different types of PLA filament with no problems on my Kobra S1. If the barrel handle sticks and cannot be easily separated you should add 0.05mm to “X-Y hole compensation”. To print the cannon it is recommended to use hot bed adhesion aid. Glue or spray To remove the lower support from the inside of the barrel use a screwdriver or something flat to carefully press the support towards the center. The spring is more or less hard depending on the type of PLA used. Very soft PLA filaments produce loose springs. If the spring is too hard or too soft please let me know in the comments the type of PLA you are using. The ship design is a remix of @ncsandor Floating Paper Boat from printables platform I have modified it to make it unsinkable and modify the buoyancy to add the flag. The cannon design is inspired by @Makkuro Working Cannon (Print-In-Place) from printables platform