PiSec Cam MKIV

► MK V located here: https://www.thingiverse.com/thing:3296793/files Does not use POE brick. Intended for standalone use with USB flash drive storage or for Pi 3 B+ with POE hat.

Well I designed another camera. This is based on the camera and Pi mount from the MKIII, but I changed it up so that the Pi plate uses shorter 3mm screws - 20mm should work fine - to attach to the camera plate. Added counterbored holes to the bottom of the Pi plate too, and a grid for zip tie attachment to the cam plate. Made the O-ring groove on around the camera lens bigger so it should print easier. Supports needed on cam plate and Pi plate, but there won't be many, just in the counterbores and clip slots on the Pi plate, and in the holes for the IR lights and the O-ring groove on the cam plate. The zip tie grid shouldn't need any. As always print the PiPlate Clips laying down so the layer lines won't weaken them. Same for the hood, print with the back surface on the build plate so the layer lines run al