PixelWing Enclosure

An enclosure designed for the [PixelWing ESP32-S2 RGB Matrix](https://circuitpython.org/board/odt_pixelwing_esp32_s2/) by [Oak Development Technologies](https://www.tindie.com/products/oakdevtech/pixelwing-esp32-s2-rgb-matrix/). I created it for use with [TallyCircuitPi](https://github.com/deckerego/tally_circuitpy), a tally light platform used with OBS to indicate which cameras are live during a broadcast.

The print comes in two parts: the front which is intended to be used as a diffuser for the super-bright LEDs and interchangeable back parts which snaps to the enclosure and allows you to use the enclosure on a camera mount, a stand-alone light, or with a velcro loop. Gaps are left for access to the reset button + LED, the USB-C port on the side, and the ESP32 antenna at the top.

The interchangeable backplates either have a flash shoe mount to attach to a camera, or a foot to allow it to stand on a flat surface, or a simple loop so it can hang from a mount using a velcro strap