Planet Venus - Hueforge

This is 3 color Hueforge of planet Venus. Its part of my project to make all planets as a hueforge pictures, so i can hang them on my wall. I had to change the size to 100x100, because of MakerWorld upload limitations. The raw model is 180x180. You can change the size to your liking in the slicer. Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.16mmThe Max Depth is 1.6mm and the Actual Depth is 1.6mm Filaments Used: PLA BambuLab Basic Brown Transmission Distance: 2 PLA Print-me Lemon Drop Transmission Distance: 7 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Brown At layer #8 (0.72mm) swap to Lemon Drop At la