Thingiverse
Plant Pot
door TDM_Tech
1
Downloads
3
Likes
0
Makes
UPDATE:
V2.1: I made the walls on the bottom thicker. When printing I recommend having the "Seam" all in line (Not random). I also recommend increasing the "walls" to 5. I have the best prints with a .75mm tip. With these settings I have not had to use the "ABS Slurry".
I will be updating the "Auto-Water" soon.
Old Version
V1: I had problems with this not leaking water, Should have made the walls thicker. To help with that I made "ABS Slurry" and put a layer in the bottom.
V2.1: I made the walls on the bottom thicker. When printing I recommend having the "Seam" all in line (Not random). I also recommend increasing the "walls" to 5. I have the best prints with a .75mm tip. With these settings I have not had to use the "ABS Slurry".
I will be updating the "Auto-Water" soon.
Old Version
V1: I had problems with this not leaking water, Should have made the walls thicker. To help with that I made "ABS Slurry" and put a layer in the bottom.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!