Plaster mold kit

Mold kit for to be cast with plaster of Paris. Can be used to make resin pendants or other items.

Directions:

1. Place the flat rectangles plates into the bottom of each mold tray, spray each piece with coconut oil spray on all sides for easy release once set.
2. Pour plaster into mold tray and place the molds into the tray aligning the holes on each corner. Place the mold and tray upright into a vice and gently squeeze them together, top up each mold with plaster.
3. Once set after 24 hours, carefully remove the top of the mold from the tray being careful to not snap the alignment pins.
4. Use the pressing tool to release the molds from the bottom and remove the plates from the bottom of each mold, alternately, you can cast in the casting tray halves when aligned with the pins in each corner.
5. Allow to dry for at least 48 hours.
6. Spray each mold with release spray or other release agent
7. Align molds and gently clamp together (preferably with some kind of metal plate