Playable 3d mostly printed 6 string electric guitar

This is the 6 string version of a playable 3d printable electric guitar kit. This was optimized mostly for printing on a 400x400 . This kit is designed to have 8mm strengthening rods through the neck and the headstock. Attaching the neck to the body requires a block of wood to fill in the void at the bottom of the neck. This will attach the neck to the body securely.

Print the following with 95% infill (print fretboard and inlays with 60% infill overlap to ensure no gaps when sanding)
-Fretboard
-BodyCenter
-All Neck Parts
-Headstock
-Inlays

Body sides can be printed at 25% or more infill.

This includes a fret press tool for a drill press, and a fret board sanding block for the appropriate radius.

Kit is designed to use the following hardware:
- Sperzel tuners https://www.amazon.com/Sperzel-Trim-Lok-Tuning-Machines-Black/dp/B000Z7INAW/ref=sr_1_4?crid=361YYKN2SKZ0T&dchild=1&keywords=sperzel+locking+tuners&qid=1586802476&s=musical-instruments&sprefix=sperzel+%2Cmi