Playing Card Case

This box is designed for two poker card decks and features two separate slots. It fits cards up to 60 × 91 mm, with a maximum deck thickness of 12.5 mm per deck. The cards are securely held in place by a locking lid while remaining easy to remove.The lid uses a 3 × 30 mm dowel pin, which should be carefully press-fitted or gently tapped in with a hammer. Filaments with poor layer adhesion may split during assembly, so caution is advised. PLA Basic has been tested successfully.The latch is inserted into the slot in the lid. Depending on print quality, a small amount of sanding may be needed for a smooth fit.