Playschool Pipeworks: Pipe Manufacturing Kit

This kit has all the tools you need to select the proper PVC pipes, and drill the holes for the PipeWorks playset. WARNING! Not all PVC pipes are the same size so using the tolerance tool is CRUCIAL when buying the pipes. otherwise you will waist hundreds of dollars (trust me bro). Pieces in this kit: 1x Tolerance tool2x Drill templets1x Workholding pin ("the pin") STEP ONE:Print the kit in the same filament you will be printing the parts in later. this will limit tolerance issues later, but is still not foolproof. ALWAYS REMEMBER TO CHECK YOUR FIRST BATCH OF POARTS BEFORE MASS PRINTING. STEP TWO:Take the tolerance tool with you to whatever hardware store you buy your PVC from. Test the inside and outside of the 1 ½" PVC to make sure the parts will fit. Inside tolerance SHOULDN'T be snug. it should slide in with minimal gap (1mm or less), yet SHOULD NOT rattle when shaken side to side. It's a feel you will understand when you get other parts built, so its not a bad