Playstation Logo Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x133.33mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Cobalt Blue At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to Pumpkin Orange At layer #26 (2.16mm) swap to Black At layer #35 (2.88mm) swap to BambuLab Green for the rest.