MakerWorld
Signs & Logos
Voir le modèle
Playstation rgb table sign light
38
Téléchargements
37
Likes
10
Makes
The second playstation symbol table sign . Since my petg was to shiny i printed in pla , but i would recommend petg if you plan on using the led's on full white brightness or outdoors. If you could place the led's better than me or use a flexible led strip ,add hot glue in places where the led strip lifts up or bends. Then put it all together layer by layer with ca glue or something similar , don't put too much so there isn't any squeeze out .Add blue thread lock or a dab of ca glue for the m3 screws in the base so they don't come loose after time . I used :ws2812b led lightsSp611e usb led controller hidden in the base / Or use esp32 with wled for more and better led effects .usb extensionm3 x 15mm screws 3pcs3.5mm x 10mm threaded screws for the base back cover Hope you enjoy the sign :)
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
