Thingiverse
PlectrumBox
by GrimbiXcode
14
Downloads
8
Likes
1
Makes
Material
----------
First, I printed the Box with PLA with an infill of 40%.
For the second print, I used wooden filament and an infill of 100%.
Tip: If you won't to infill at 100%, set the wall thickness to 2 x Extruderdiameter or you will see the points of intersection.
Be careful...
----------------
.. when you open the box for the first time ;)
----------
First, I printed the Box with PLA with an infill of 40%.
For the second print, I used wooden filament and an infill of 100%.
Tip: If you won't to infill at 100%, set the wall thickness to 2 x Extruderdiameter or you will see the points of intersection.
Be careful...
----------------
.. when you open the box for the first time ;)
GrimbiXcode also publishes on
5 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!