Plow Roller No Bearing

This design was for the pulley wheel on my ATV snowplow so the winch rope could easily roll and lift or lower the plow blade. The manufacturer pulley wheel was much smaller and the winch rope frequently came off. This is a simple design so please feel free to remix it, resize it, etc. The dimensions are as follows: 50mm wide X 19mm thick with a 5mm channel and 10.5mm center hole. Again, feel free to remix/edit/change. There is a separate design that includes bearings in the center to allow for a smooth roll. The design was printed on a Bambu Lab P1S with PETG at 75% infill, using the Bambu Studio slicer. The pulley wheel is plenty strong and has not had any failures. I don't recommend PLA for this part if it will be outside and in snow. PETG/ABS/ASA recommended.Tags