Plumbob Light

Description A Sims Plumbob light. Designed using maker supply components for easy plug and play assembly. The light is dimmable using a potentiometer so you can set the brightness that you like. Couldn't find anything like it online so decided to design one. This will require some sort of clear tube to run the COB strip through. I used a clear straw. There is a version with no electronics or hardware that is display only for those that don't want to purchase components and hardware. Customizable for Convenience The light insert is customizable to the inside diameter of whatever it is you use for the tube. The diameter is limited to a maximum of .46875" and a minimum of .125". Measure the inside of your tube and enter that for your diameter in inches. Generate the light Insert and download the STL. Open the print profile of the plumbob and insert the STL onto Plate 2 with the base. You can also download the 3MF and print it separate. This step is not necessary if printing for display on