πMiga - Raspberry Pi 4 case

A case for a Raspberry Pi 4 + SSD drive inspired by the classic Amiga 4000 look. To get the led and the switch working in Raspbian, you need to change /boot/config.txt adding the following lines: # HD leddtoverlay=gpio-led,gpio=8,label=hdled,trigger=mmc1# power indicatorgpio=4=op,dh# start a system shutdown when the button is presseddtoverlay=gpio-shutdown Connect the LEDs and the switch to the above mentioned GPIO pins. BoM:5 M3 screws (4 for the SSD, one to block the top part of the case)4 M2.