Slicer Discord
pocahontas – Modèle 3D imprimable de MakerOnline MakerOnline
Art

pocahontas

par Quikytona · Art
23 Téléchargements
8 Likes
0 Makes
Voir le modèle
Project: pocahontsbarco.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x150mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 3mm and the Actual Depth is 3.1mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Smart Recycled Blue Transmission Distance: 2.2 PLA Smart Recycled Green Transmission Distance: 6.5 PLA Smart Recycled Red Transmission Distance: 4.4 PLA Kingroon White Transmission Distance: 5.8 PLA PolyLite Grey Transmission Distance: 1 PLA Kingroon Brown Transmission Distance: 2.7 PLA Smart Recycled Orange Transmission Distance: 5.7 PLA Smart Recycled Yellow Transmission Distance: 9.3 This print uses 9 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue At layer #9 (0.8mm) swap to Green At layer #12 (1.04mm) swap to Blue At layer #13 (1.12mm) swap to Red At layer #16 (1.36mm) swap to White At layer #19 (1.6mm) swap to Grey At layer #20 (1.68mm) swap to Brown At layer #22 (1.84mm) swap to Orange At layer #27 (2.24mm) swap to Yellow At layer #31 (2.56mm) swap to White for the rest.
Catégorie
Art
Source
MakerOnline
Publié
Ce qu'il faut pour imprimer: Intermédiaire Confiance faible
Pourquoi ?
grande impression
Monobloc
Supports 1/3
Assemblage 0/3
Réglages 1/3
Taille du plateau 2/3
Post-traitement 0/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
PLA
Plateau min.
200 mm (Grand)
Logiciel
Cura, PrusaSlicer ou similaire
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection