Slicer Discord
Pocket Can't stop – 3D printable model from MakerOnline MakerOnline
Pocket Can't stop – Bild 1 Pocket Can't stop – Bild 2
Toys&Games

Pocket Can't stop

499 Downloads
162 Likes
0 Makes
Go to Model
You need four dice. On your turn, these are rolled and you have to make the sum of two dice. For example, if you roll 2, 4, 5, 5, you have the option of rolling 6 and 10 or 7 and 9. Now you can place the large figures (white runner figures) on the squares of the chosen sums. By rolling further dice, you can move the figure further and further up to the respective number. If you don't hit any of the chosen numbers, you make a mistake and have to remove the pieces from the board. If you decide not to roll any more dice, you can replace the pieces with your own colored pieces. If a player reaches the top number, the column, and therefore the total, is blocked for all players. The player who wins three sums is the winner. You need to print 3 white runner figures (big figures) 11 little figures per player (four different colors) You will need 4 dice to play the game. Print settings: Everything except the figures: Walls: 3 Top: 3 Bottom: 3 Infill: 10% Figures: Walls: 2 Top: 2 Bottom: 2 Infill: 10% No supports required. ---------------------------------------------------------------------------------- Man benötigt vier Würfel. Beim Zug werden diese gewürfelt und man muss die Summe aus zwei Würfeln bilden. Würfelt man beispielsweise 2, 4, 5, 5 gibt es die Möglichkeit 6 und 10 oder 7 und 9 bilden. Nun kann man die großen Figuren auf die Felder der gewählten Summen stellen. Durch weitere Würfe kann man die Figur immer weiter zu jeweiligen Zahl hochziehen. Trifft man keine wählbare Zahl begeht man einen Fehlwurf und muss die Spielfiguren vom Spielfeld nehmen. Entscheidet man sich, nicht mehr weiter zu würfeln, kann man die Figuren durch seine eigenen farbigen Spielfiguren austauschen. Hat ein Spieler die obere Zahl erreicht, wird die Spalte, und somit auch die Summe, für alle Spieler gesperrt. Gewonnen hat der Spieler, der drei Summen gewinnt. Gedruckt werden müssen 3 weiße Spielfiguren (große Figur) 11 kleine Figuren pro Spieler (in vier verschiedenen Farben) Es werden zum Sp
Category
Toys&Games
Source
MakerOnline
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Rego also publishes on

101 additional models across 3 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection