Thingiverse
Pocket Knife
von mishkin2
1.6k
Downloads
1.2k
Likes
18
Makes
This is a replica of the famous knife from Giaco which can be purchased for $39. And you can get it for the some time and 17 grams of filament.
The main thing is that there are no more covers, which either do not hold well, or you need to look for small screws. Thanks to the absence of lids, the knife has become thinner and lighter. It can be assembled and disassembled without tools. Although for the first assembly, a file or sandpaper will still be useful for you to remove printing artifacts. And it will also be better if you wipe the slip points and the spring with silicone grease.
The experience with my previous knife https://www.thingiverse.com/thing:4747489 helped me a lot and I tried to take into account all the mistakes. Now all parts are printed without support. And if the printer is well set up, you get a very functional thing in just a couple of hours, with a minimum of post-processing.
Attention.
In order for the blade to be firmly fixed and there was no backlas
The main thing is that there are no more covers, which either do not hold well, or you need to look for small screws. Thanks to the absence of lids, the knife has become thinner and lighter. It can be assembled and disassembled without tools. Although for the first assembly, a file or sandpaper will still be useful for you to remove printing artifacts. And it will also be better if you wipe the slip points and the spring with silicone grease.
The experience with my previous knife https://www.thingiverse.com/thing:4747489 helped me a lot and I tried to take into account all the mistakes. Now all parts are printed without support. And if the printer is well set up, you get a very functional thing in just a couple of hours, with a minimum of post-processing.
Attention.
In order for the blade to be firmly fixed and there was no backlas
mishkin2 veröffentlicht auch auf
81 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
