Thingiverse
Pocket Safe 2
by MikleVV
3
Downloads
3
Likes
0
Makes
This is a remake of a really working design https://www.thingiverse.com/thing:2985237
To improve the convenience of operation and reliability of the mechanism, the following changes have been made:
the printed pins on the shafts broke off. Shafts converted to steel rod. A nail with a diameter of 1.2 mm is used as a rod. It must be melted into the allotted place and then shortened.
Extended handle for ease of use
the scale with numbers is printed separately and glued onto the existing scale.
an enlarged case has been made that can accommodate several flash drives.
To improve the convenience of operation and reliability of the mechanism, the following changes have been made:
the printed pins on the shafts broke off. Shafts converted to steel rod. A nail with a diameter of 1.2 mm is used as a rod. It must be melted into the allotted place and then shortened.
Extended handle for ease of use
the scale with numbers is printed separately and glued onto the existing scale.
an enlarged case has been made that can accommodate several flash drives.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
