Poe Hueforge

Project: poe.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Overture Light Gray Transmission Distance: 0.7 PLA Overture Matte White Transmission Distance: 3.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #13 (1.12mm) swap to Light Gray At layer #15 (1.28mm) swap to White for the rest.